For Better Performance Please Use Chrome or Firefox Web Browser

Publications

Journal Papers
sort ascending
A non-enzymatic sensor based on three-dimensional graphene foam decorated with Cu-xCu2O nanoparticles for electrochemical detection of glucose and its application in human serum February 2020
An adhesive and injectable nanocomposite hydrogel of thiolated gelatin/gelatin methacrylate/Laponite® as a potential surgical sealant February 2020
Fabrication and characterization of polycaprolactone fumarate/gelatin-based nanocomposite incorporated with silicon and magnesium co-doped fluorapatite nanoparticles using electrospinning method January 2020
Biomimetic Nylon 6-Baghdadite Nanocomposite Scaffold for Bone Tissue Engineering March 2020
In situ synthesis of fluorapatite‐ZnO nanocomposite powder via mechanical alloying for biomedical applications February 2020
Structural and mechanical properties of fibrous poly (caprolactone)/gelatin nanocomposite incorporated with cellulose nanofibers January 2020
TiO2 nanotubes/reduced GO nanoparticles for sensitive detection of breast cancer cells and photothermal performance January 2020
Embedding CuO Nanoparticles in PDMS-SiO2 Coating to Improve Antibacterial Characteristic and Corrosion Resistance January 2019
Double layer graphene oxide-PVP coatings on the textured Ti6Al4V for improvement of frictional and biological behavior August 2019
Electrophoretic deposition of chitosan reinforced graphene oxide-hydroxyapatite on the anodized titanium to improve biological and electrochemical characteristics August 2019
(BaCa)TiO3 nanopowder: Synthesis and their electrical and biological characteristics March 2019
Biological and corrosion evaluation of Laponite®: Poly (caprolactone) nanocomposite coating for biomedical applications December 2019
Role of Heat Treatment on the Fabrication and Electrochemical Property of Ordered TiO2 Nanotubular Layer on the As-Cast NiTi January 2019
Sprayable and injectable visible-light Kappa-carrageenan hydrogel for in-situ soft tissue engineering October 2019
An injectable mechanically robust hydrogel of Kappa-carrageenan-dopamine functionalized graphene oxide for promoting cell growth June 2019
Development of an in-situ chitosan‑copper nanoparticle coating by electrophoretic deposition April 2019
Green synthesis and morphology dependent antibacterial activity of copper oxide nanoparticles February 2019
Influence of copper on the structural, mechanical, and biological characteristics of Mg–1Al–Cu alloy November 2019
Silk-Laponite® fibrous membranes for bone tissue engineering July 2019
An eco-friendly triboelectric hybrid nanogenerators based on graphene oxide incorporated polycaprolactone fibers and cellulose paper May 2019
Role of micro-dimple array geometry on the biological and tribological performance of Ti6Al4V for biomedical applications March 2019
A review on recent advancements in electrochemical biosensing using carbonaceous nanomaterials May 2019
Dexamethasone loaded Laponite®/porous calcium phosphate cement for treatment of bone defects August 2019
Luminescent Palladacycles Containing a Pyrene Chromophor; Synthesis, Biological and Computational Studies of the Interaction with DNA and BSA May 2019
Ion-beam irradiation of DLC-based nanocomposite: Creation of a highly biocompatible surface March 2019
Core–shell fibrous membranes of PVDF–Ba0.9Ca0.1TiO3/PVA with osteogenic and piezoelectric properties for bone regeneration December 2019
Nano-featured poly (lactide-co-glycolide)-graphene microribbons as a promising substrate for nerve tissue engineering September 2019
Chitosan-heparin nanoparticle coating on anodized NiTi for improvement of blood compatibility and biocompatibility April 2019
Development of three-dimensional piezoelectric polyvinylidene fluoride-graphene oxide scaffold by non-solvent induced phase separation method for nerve tissue engineering April 2019
Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering November 2019
Modulation of the mechanical, physical and chemical properties of polyvinylidene fluoride scaffold via non-solvent induced phase separation process for nerve tissue engineering applications July 2018
Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering June 2018
Anal Sphincter: A Comprehensive Review April 2018
Fabrication, characterization, and biocompatibility assessment of a novel elastomeric nanofibrous scaffold: A potential scaffold for soft tissue engineering August 2018
Green reduction of graphene oxide by ascorbic acid January 2018
Anisotropic architecture and electrical stimulation enhance neuron cell behaviour on a tough graphene embedded PVA: alginate fibrous scaffold February 2018
A three-layered hollow tubular scaffold as an enhancement of nerve regeneration potential August 2018
Gelatin methacryloyl hydrogel for glucose biosensing using Ni nanoparticles-reduced graphene oxide: An experimental and modeling study January 2018
Fabrication and characterization of laponite-calcium phosphate based cement for filling bone defects April 2018
Synthesis of Three-dimensional Graphene and Optimization of Its Morphology September 2018
Chitosan-58S bioactive glass nanocomposite coatings on TiO2 nanotube: Structural and biological properties April 2018
Design and characterization of poly-ε-caprolactone electrospun fibers incorporated with α-TCP nanopowder as a potential guided bone regeneration membrane April 2018
Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property November 2018
Hemocompatible and Bioactive Heparin‐Loaded PCL‐α‐TCP Fibrous Membranes for Bone Tissue Engineering April 2018
Antibacterial chitosan-copper nanocomposite coatings for biomedical applications May 2018
Nanohybrid hydrogels of laponite: PVA-Alginate as a potential wound healing material November 2017
Tough and conductive hybrid graphene-PVA: Alginate fibrous scaffolds for engineering neural construct January 2017
Ni nanoparticle-decorated reduced graphene oxide for non-enzymatic glucose sensing: an experimental and modeling study June 2017
Surface modification of PCL-diopside fibrous membrane via gelatin immobilization for bone tissue engineering June 2017
pH sensitive dexamethasone encapsulated laponite nanoplatelets: Release mechanism and cytotoxicity February 2017
Sr-doped forsterite nanopowder: Synthesis and biological properties October 2017
A facile one-step strategy for development of a double network fibrous scaffold for nerve tissue engineering April 2017
Synthesis, characterization and in vitro behavior of nanostructured diopside/biphasic calcium phosphate scaffolds January 2017
Design and characterization of dexamethasone-loaded poly (glycerol sebacate)-poly caprolactone/gelatin scaffold by coaxial electro spinning for soft tissue engineering September 2017
Fabrication and characterization of two-layered nanofibrous membrane for guided bone and tissue regeneration application January 2017
Electrochemical and in vitro bioactivity of nanocomposite gelatin-forsterite coatings on AISI 316 L stainless steel February 2017
From sub-microsized MgAl2O4 powder to MgAl2O4-Si3N4 nanocomposite powder by spray drying of ultrasonicated suspensions October 2017
Design and characterization of dexamethasone-loaded poly (glycerol sebacate)-poly caprolactone/gelatin scaffold by coaxial electro spinning for soft tissue engineering January 2017
Polyethylenimine/kappa carrageenan: Micro-arc oxidation coating for passivation of magnesium alloy July 2017
Combinational processing of 3D printing and electrospinning of hierarchical poly(lactic acid)/gelatin-forsterite scaffolds as a biocomposite: Mechanical and biological assessment November 2017
Nano‑calcium phosphate bone cement based on Si-stabilized α-tricalcium phosphate with improved mechanical properties August 2017
Design and characterization of dexamethasone-loaded poly (glycerol sebacate)-poly caprolactone/gelatin scaffold by coaxial electro spinning for soft tissue engineering September 2017
Nano-Enabled Approaches for Stem Cell-Based Cardiac Tissue Engineering May 2016
Corrosion and bioactivity evaluation of nanocomposite PCL-forsterite coating applied on 316L stainless steel August 2016
Reinforcement of electrospun poly (ε‐caprolactone) scaffold using diopside nanopowder to promote biological and physical properties August 2016
Mechanical and cytotoxicity evaluation of nanostructured hydroxyapatite-bredigite scaffolds for bone regeneration July 2016
Mechanical and cytotoxicity evaluation of nanostructured hydroxyapatite-bredigite scaffolds for bone regeneration July 2016
A Facile One-step Electrochemical Synthesis of Nickel Nanoparticle/Graphene Composites for Non-enzymatic Biosensor Applications December 2015
Tough Flexible Hybrid Nanofibrous Scaffolds from CNT Incorporation for Cardiac Tissue Engineering April 2014
PCL-Forsterite Nanofibrous Membranes for Controlled Release of Dexamethasone September 2014
Tri-layered Elastomeric Scaffolds for Engineering Heart Valve Leaflets February 2014
Electrospun PGS: PCL Microfibers Align Human Valvular Interstitial Cells and Provide Tunable Scaffold Anisotropy January 2014
PGS:Gelatin nanofibrous scaffolds with tunable mechanical and structural properties for engineering cardiac tissues June 2013
Tunable cellular interactions and physical properties of nanofibrous PCL-forsterite:gelatin scaffold through sequential electrospinning August 2013
Chitin nanofiber micropatterned flexible substrates for tissue engineering March 2013
Effects of Surface Modification on the Mechanical and Structural Properties of Nanofibrous Poly(caprolactone)/Forsterite Scaffold for Tissue Engineering Applications July 2013
Development of novel aligned nanofibrous composite membranes for guided bone regeneration April 2013
Novel forsterite/polycaprolactonenanocomposite scaffold for tissue engineering applications March 2012
Novel Fluorapatite-Forsterite Nanocomposite Powder for Oral Bone Defects January 2012
Preparation and characterization of polycaprolactone/forsterite nanocomposite porous scaffolds designed for bone tissue regeneration February 2012
Nanostructured forsterite coating strengthens porous hydroxyapatite for bone tissue engineering January 2010
Improvement of mechanical properties and biocompatibility of forsterite bioceramic addressed to bone tissue engineering materials June 2010
Synthesis and characterization of bioactive forsterite nanopowder February 2009
The effect of fluorine ion on fabrication of nanostructure forsterite during mechanochemical synthesis June 2009
Two-step sintering of dense, nanostructural forsterite March 2009
Preparation and characterization of nanostructure forsterite powder by ball milling and thermal treatment March 2008
Mechanochemistry synthesize and characterization of nanostructure forsterite bioceramics February 2008
Mechanically activated crystallization of phase pure nanocrystalline forsterite powders October 2008
Characterization and bioactivity evaluation of forsterite nano-bioceramic February 2008
Fabrication and Characterization of Al-AlN nanocomposite powder by mechanical alloying method November 2007
Books Chapter
sort ascending
Medical Textiles as Substrates for Tissue Engineering March 2017
Spatial Patterning of Stem Cells to Engineer Microvascular Networks January 2016
Micropatterning Techniques to Control Cell–Biomaterial Interface for Cardiac Tissue Engineering Fall 2015
Microfabrication of Cell-Laden Hydrogels for Engineering Mineralized and Load Bearing Tissues Winter 2015
Conference Papers
sort ascending
Fabrication and Evaluation of Sodium Alginate: Poly Vinyl Alcohol/Graphene Nanocomposite Fibrous Scaffold for Nerve Tissue Engineering Application Spring 2016
Synthesize, characterization and evaluation of mechanical and physical properties of Hydroxyapatite-Bredigite scaffold for biomedical application Winter 2015
Synthesize, characterization and evaluation of mechanical and physical properties of Porous nanostructure Hydroxyapatite-diopside for tissue engineering application Fall 2015
Fabrication and characterization of gelatin-forsterite coating on stainless steel for biomedical application Fall 2015
Combination of PLA Micro-fibers and PCL-Gelatin Nano-fibers for Development of Bone Tissue Engineering Scaffolds Fall 2015
Preparation and Evaluation of Nanocomposite Fibrous Poly(ε-caprolactone)-Diopside Membranes for Guided Bone Regeneration Winter 2015
Preparation, Characterization and Mechanical Assessment of Poly (Lactide-Co-Glycolide)/Hyaluronic Acid/Fibrin/Bioactive Glass Nano-composite Scaffolds for Cartilage Tissue Engineering Applications. December 2015
Carbon Nanotube-Embedded PGS:Gelatin Fibrous Scaffolds for Cardiac Tissue Engineering April 2013
Micropatterned co-cultures of endothelial cells and mesenchymal stem cells within gelatin methacrylate hydrogels March 2013
Micro and Nanostructured Self-Assembled Chitin Nanofibers Scaffolds May 2012
Nanofibrous scaffolds for Infarcted Myocardium Regeneration March 2012
Sol-gel derived forsterite-fluorapatite Composite nanopowder for biomedical applications May 2011
Synthesis and characterization of fluorapatite-forsterite nanocomposite scaffolds via gel-casting method for bone tissue engineering March 2011
Fabrication and Characterization of nanocomposite scaffold of PCL/forsterote for bone tissue engineering November 2010
Synthesis and in vitro bioactivity of forsterite nanocrystallite powder October 2008
Preparation and characterization of nanostructure forsterite powder by ball milling and thermal treatment, March 2008
Fabrication and in vitro bioactivity evolution of forsterite nanopowder by sol-gel method November 2008
Fabrication and in vitro biocompatibility evaluation of forsterite nanopowder June 2008
Fabrication and characterization of forsterite powder by mechano-chemical synthesize method February 2007
Fabrication and Characterization of Al-AlN nanocomposite powder by mechanical alloying method November 2007
Preparation and characterization of nanostructure forsterite bioceramics by mechanochemical synthesis November 2007

تحت نظارت وف ایرانی